To construct a BSA standard curve, a dilution series needs to be made using the 2mg/ml BSA standard prepared above. Use the formula C1V1 = C2V2 and determine the volumes of the 2mg/ml standard that you need to dilute in PBS to make 1mL or 1000ul of each BSA working standard at concentrations ranging from 0.1mg/ml to 1.5mg/ml BSA
Question
To construct a BSA standard curve, a dilution series needs to be made using the 2mg/ml BSA standard prepared above. Use the formula C1V1 = C2V2 and determine the volumes of the 2mg/ml standard that you need to dilute in PBS to make 1mL or 1000ul of each BSA working standard at concentrations ranging from 0.1mg/ml to 1.5mg/ml BSA
Solution
To construct a BSA standard curve, you need to create a series of dilutions from the 2mg/ml BSA standard. The concentrations of these dilutions should range from 0.1mg/ml to 1.5mg/ml.
Here's how you can calculate the volumes of the 2mg/ml standard that you need to dilute in PBS to make 1mL or 1000ul of each BSA working standard:
-
Use the formula C1V1 = C2V2, where:
- C1 is the initial concentration
- V1 is the initial volume
- C2 is the final concentration
- V2 is the final volume
-
In this case, C1 is 2mg/ml (the concentration of your BSA standard), and V2 is 1mL or 1000ul (the final volume you want for each of your working standards).
-
To find V1 (the volume of the 2mg/ml standard you need to dilute), rearrange the formula to V1 = C2V2 / C1.
-
Substitute the values into the formula for each of the desired final concentrations (C2):
- For a final concentration of 0.1mg/ml: V1 = (0.1mg/ml * 1mL) / 2mg/ml = 0.05mL or 50ul
- For a final concentration of 0.2mg/ml: V1 = (0.2mg/ml * 1mL) / 2mg/ml = 0.1mL or 100ul
- Continue this process up to a final concentration of 1.5mg/ml.
-
After calculating V1 for each concentration, subtract this value from 1mL to find the volume of PBS needed to reach a total volume of 1mL.
Remember to mix well after each addition of PBS to ensure the BSA is evenly distributed.
Similar Questions
You are supplied with a 10mg/mL bovine serum albumin (BSA) stock solution made up in phosphate buffered saline (PBS). You need to make a 2mg/mL BSA standard solution from the BSA stock solution. How much 10mg/mL BSA stock solution and how much phosphate buffered saline (PBS) do you need to make 10mL of a 2mg/mL BSA working standard.
How much primary antibody should be added to prepare 14 mL solution of primary antibody with a dilution of 1:500?14 µL2.8 µL1.4 µL28 µL
You have prepared a 2 M stock solution of an analyte you will be diluting to prepare your standard solutions. What volume (in mL) will you need to add and dilute in a 250 mL volumetric flask to achieve a final concentration of 0.06 M? Answer to 1 decimal place (Hint: C1V1=C2V2)
You have a solution containing 10mg/ml of protein bovine serum albumin (BSA). MW of BSA is 68000. Calculate the concentration of this solution expressed as mM (Express your answer to two decimal places, don't forget the unit symbol, do not place a space between the numerical value and the unit symbol in your answer).
If you add 1.0 ml of a colored solution (Stock) to 4.0 ml of water in a test tube, what is the dilution ratio, of the colored solution to the final volume?
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.