The cable BCA in the figure below passes without friction through a hole at the end of the strut at C, and ties to the ground at A and to the end of the pole at B. If the tension in the cable is 800 lb, what is the force exerted by the cable onto the pole at B?

Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of the suspended body

The horizontal beam of length 𝐿𝑏𝑚 ≔ 9.397 𝑚 shown below weighs 𝑀𝑏𝑚 ≔ 230.0 𝑁, and itscenter of gravity is at its center. Given 𝐿𝑐𝑎𝑏 ≔ 11.00 𝑚 and ℎ ≔ 5.00 𝑚, Find (a) the tension inthe cable if the weight of the can is 𝑊𝑐𝑎𝑛 ≔ 350.0 𝑁, and (b) the horizontal and verticalcomponents of the force exerted on the beam at the wall. (3 sig figs)

The mass of a lift is 500 kg. When it ascends with an acceleration of 2 m/s2, the tension in the cable will be [g = 10 m/s2]A 6000 N B 5000 N C 4000 N D 50 N

A 2009-kg elevator moves with an upward acceleration of 1.10 m/s22. What is the force exerted by the cable on the elevator?

A model airplane of mass 0.800 kg flies with a speed of 35.0 m/s in a horizontal circle at the end of a 62.0-m control wire as shown in Figure (a). The forces exerted on the airplane are shown in Figure (b): the tension in the control wire, the gravitational force, and aerodynamic lift that acts at 𝜃 = 20.0° inward from the vertical. Compute the tension in the wire, assuming it makes a constant angle of 𝜃 = 20.0° with the horizontal. N