Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of the suspended body

The horizontal beam of length 𝐿𝑏𝑚 ≔ 9.397 𝑚 shown below weighs 𝑀𝑏𝑚 ≔ 230.0 𝑁, and itscenter of gravity is at its center. Given 𝐿𝑐𝑎𝑏 ≔ 11.00 𝑚 and ℎ ≔ 5.00 𝑚, Find (a) the tension inthe cable if the weight of the can is 𝑊𝑐𝑎𝑛 ≔ 350.0 𝑁, and (b) the horizontal and verticalcomponents of the force exerted on the beam at the wall. (3 sig figs)

The cable BCA in the figure below passes without friction through a hole at the end of the strut at C, and ties to the ground at A and to the end of the pole at B. If the tension in the cable is 800 lb, what is the force exerted by the cable onto the pole at B?

a 150. kg crate, to the right of the pulley, is released from rest and begins to fall to the ground. If the mass on the left is m = 55.0 kg, what is the magnitude of the tension of the rope attached to the 150. kg crate? Assume the rope and pulley are massless.

An elevator filled with passengers has a mass of 1643 kg.(a)The elevator accelerates upward from rest at a rate of 1.20 m/s2 for 3.00 s. Calculate the tension in the cable (in N) supporting the elevator. N(b)The elevator continues upward at constant velocity for 8.92 s. What is the tension in the cable (in N) during this time? N(c)The elevator decelerates at a rate of 0.600 m/s2 for 6.00 s. What is the tension in the cable (in N) during deceleration? N(d)How high has the elevator moved above its original starting point, and what is its final velocity? (Enter the height in m and the final velocity in m/s.)height mfinal velocity m/s

Une masse de 10 kg est suspendue à deux câbles de même longueur. Si l’angle entre les câbles est de 45°, quelle est la force de tension dans chacun des câbles?