An IPv6-enabled host using SLAAC (Stateless Address Autoconfiguration) would learn the address of the default gateway through router advertisement messages received from the link router.

Here's the step-by-step process:

1. The host sends a router solicitation (RS) message to all routers on the local link. This is done to request immediate router advertisements, instead of waiting for the next scheduled one.

2. The router responds with a router advertisement (RA) message, which contains the necessary information for the host to configure its network interface. This includes the prefix of the network and the default gateway (the router's address).

3. The host receives the router advertisement message and uses the information to configure its network interface. The default gateway address is set to the address of the router that sent the RA message.

So, the method employed is receiving router advertisement messages from the link router.

Question

An IPv6-enabled host using SLAAC (Stateless Address Autoconfiguration) would learn the address of the default gateway through router advertisement messages received from the link router.

Here's the step-by-step process:

1. The host sends a router solicitation (RS) message to all routers on the local link. This is done to request immediate router advertisements, instead of waiting for the next scheduled one.

2. The router responds with a router advertisement (RA) message, which contains the necessary information for the host to configure its network interface. This includes the prefix of the network and the default gateway (the router's address).

3. The host receives the router advertisement message and uses the information to configure its network interface. The default gateway address is set to the address of the router that sent the RA message.

So, the method employed is receiving router advertisement messages from the link router.

Knowee AI · Accepted Answer

An IPv6-enabled host using SLAAC (Stateless Address Autoconfiguration) would learn the address of the default gateway through router advertisement messages received from the link router.

Here's the step-by-step process:

1. The host sends a router solicitation (RS) message to all routers on the local link. This is done to request immediate router advertisements, instead of waiting for the next scheduled one.

2. The router responds with a router advertisement (RA) message, which contains the necessary information for the host to configure its network interface. This includes the prefix of the network and the default gateway (the router's address).

3. The host receives the router advertisement message and uses the information to configure its network interface. The default gateway address is set to the address of the router that sent the RA message.

So, the method employed is receiving router advertisement messages from the link router.

Question

Solution

Similar Questions

Upgrade your grade with Knowee