What is the use of tracert command?1 pointTo check the routing table.The tracert command allows you to determine the path a packet takes in order to get to a destination from a given source by returning the sequence of hops the packet has traversed.
Question
What is the use of tracert command?1 pointTo check the routing table.The tracert command allows you to determine the path a packet takes in order to get to a destination from a given source by returning the sequence of hops the packet has traversed.
Solution
The tracert command is used in network troubleshooting to track the route that a packet takes from the source computer to the destination computer. It works by sending packets with increasing TTL (Time to Live) values, starting with TTL value of one. The first router in the path receives the packet, decreases the TTL value and sends the packet further. When the TTL value reaches zero, the router sends back an ICMP Time Exceeded message to the source computer. This process is repeated, increasing the TTL value with each iteration, until the destination is reached. The tracert command then displays the list of routers that the packets have traversed in reaching the destination. This can help identify where problems are occurring in the network.
Similar Questions
What is Tracert? A. A network device B. A command used to check network connectivity C. An application based on the ICMP protocol D. An ICMP error message
What information can a technician obtain by running the tracert command on a Windows PC? radio_button_unchecked the available routes in the PC routing table to reach a destination. radio_button_unchecked the available bandwidth between the PC and a destination. radio_button_unchecked layer 3 hops a packet crosses as it travels to a destination. radio_button_unchecked the verification of Layer 2 connectivity between the PC and a destination.
The basic approach used by Traceroute when it establishes a snapshot of the devices traversed to get to a remote machine is to:Question 3Answerestablish a connection (3-way handshake) with each device in turnsend a series of ICMP echo requests, with incrementing TTL numberssend a single ICMP echo request with a high enough TTL value that it will almost certainly make it through all the switching points along the way, and each one will send a message back when it processes the packetuse DNS to get the IP address of each device on the pathsend a series of ICMP echo requests, with decrementing TTL numbers
Which two tools function similar to traceroute? (Choose all that apply) 1 pointpathping netcat MtrNslookup
Discuss each command in detail used in networking:a- ipconfigb- netstatc- pingd- hostnamee‐ tracert
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.