Always set the speed change lever fully to the correct position. If you operate the cordless drill / driver with the speed change lever positioned halfway between the "1" side and "2" side, you may damage it.FALSETRUE

Remove the battery from the cordless drill / driver before changing the drill bit. This reduces the risk of starting the power tool accidentally.This is an unnecessary practice.This practice is regarded as a safe practice.

The drilling machine should be set at the correct speed for the diameter of the drill bit.This practice is regarded as a safe practice.This is an unnecessary practice.

If the drill has a keyed (Jacobs) chuck you will need to remove the chuck key after fitting or removing the drill bit.This practice is regarded as a safe practice.This is an unnecessary practice.

Select the hazard that is NOT ordinarily an issue when operating the cordless drill/driver.high vibration emission valueshigh noise levelshazardous back strainburns from hot materials or drill bit

What is the correct procedure when using the drill press / pedestal drill?Ensure work is completely touching the drill bit when turning the machine onUse a fence and/or clamp(s) to secure work pieceEnsure drill bit is loosely attached to prevent overheating