In a typical half bridge LLC resonant converter with a Centre tap transformer, has a turns ratio of 3:1:1 with input dc voltage is kept at 400V.   If the output voltage is to be maintained at 50V @ 500W Max. The reflected primary side AC resistance in ohm required for Q-factor calculation is:Select one:a. 36.47b. 12.15c. None from the given choicesd. 100.67Question 16Not yet answeredMarked out of 2.00Flag questionQuestion textIn a typical half bridge LLC resonant converter with a Centre tap transformer, has a turns ratio of 3:1:1 with input dc voltage is kept at 400V.   If the output voltage is to be maintained at 50V @ 500W Max. If the Q-factor is kept at 0.3 and the resonant frequency is kept at 50kHz. The required value of the resonant capacitor is : Select one:a. 21.8 Nano Faradb. 2.18 Nano Faradc. None of the given choicesd. 218 Nano FaradQuestion 17Not yet answeredMarked out of 2.00Flag questionQuestion textIn a typical half bridge LLC resonant converter with a Centre tap transformer, has a turns ratio of 3:1:1 with input dc voltage is kept at 400V.   If the output voltage is to be maintained at 50V @ 500W Max. If the Q-factor is kept at 0.3 and the resonant frequency is kept at 50kHz. The required value of the resonant inductor is :Select one:a. 46.4 Micro Henryb. 0.464 Micro Henryc. 4.64 Micro Henryd. None of the given choices

In a typical half bridge LLC resonant converter with a Centre tap transformer, has a turns ratio of 3:1:1 with input dc voltage is kept at 400V.   If the output voltage is to be maintained at 50V @ 500W Max. If the Q-factor is kept at 0.3 and the resonant frequency is kept at 50kHz. The required value of the resonant inductor is :Select one:a. 0.464 Micro Henryb. 46.4 Micro Henryc. None of the given choicesd. 4.64 Micro Henry

In a typical half bridge LLC resonant converter with a Centre tap transformer, has a turns ratio of 3:1:1 with input dc voltage is kept at 400V.   If the output voltage is to be maintained at 50V @ 500W Max. If the Q-factor is kept at 0.3 and the resonant frequency is kept at 50kHz. The required value of the resonant capacitor is : Select one:a. 21.8 Nano Faradb. 2.18 Nano Faradc. None of the given choicesd. 218 Nano Farad

Transformer utilization factor of a bridge full wave rectifier is equal to _________(1 Point)0.620.690.810.43

Transformer utilization factor of a center tapped full wave rectifier is ___________1. A. 0.6232. B. 0.6783. C. 0.6934. D. 0.625

A Centre-tap transformer rectifier  is required to be designed for AC-DC rectification with a transformation ratio 6:1:1 and energized from AC input of 230V 50Hz supply. with no filter capacitor. The load resistor is approximately 5.4 Ohm. The peak value of the load current would be:Select one:a. 20 Ab. None of the other given choicesc. 7 Ad. 10 A