Choose and match the statement on the right with the cable on the left from the drop-down list.Select the matching answers from the drop-down list.Straight through cableCrossover cable

Drag the descriptions of the cable types to the right.blank blank blank blank blank Defined by 100base-BxSame type connectionDefined by 10base5Devices to TvEthernet Standard base T

Match the followingGroup of answer choicesTwisted pair cable - twisting of wiresCoaxial cableOptical cablestep indexgraded index

Which type of cable connection would be used in Packet Tracer to connect a FastEthernet port on a PC to a switch port?straight-throughfibercrossoverconsole

To connect router with another router _________ cable is used.Select the correct optionReload Math Equations Straight-forward Crossover Roll over Straight-through

Which of the following is a step-by-step process for a crossover cable construction, as implied in  Network System Design.a.Untwist the wires: Untwist the wires and separate them into pairs. The standard color-coding for Ethernet cables is orange/white, orange, green/white, blue, blue/white, green, brown/white, and brown.b.Strip the cable: Use a wire stripper to remove about an inch of insulation from the ends of the cable.c.Trim the wires: Use wire cutters to trim the ends of the wires so that they are all the same length.d.Cross the wires: In a crossover cable, the transmit and receive wires need to be crossed over. This means that pins 1 and 2 and pins 3 and 6 are crossed. To do this, switch the positions of the orange and green pairse.Crimp the connector: Use a crimping tool to crimp the connector onto the cable.f.Gather the necessary tools and materials: You'll need a length of Ethernet cable, RJ45 connectors, and a crimping tool.g.Insert the wires into the connector: Insert the wires into the RJ45 connector in the correct order. The order of the wires is important, so make sure to follow the T568A or T568B wiring standards