Knowee
Questions
Features
Study Tools

Identify the correct statements.(i) Carbon dioxide is used to extinguish fires involving oil and petrol(ii) Sand is used for extinguishing fires caused by oil.(iii) Fires caused by short-circuit should not be put off by sprinkling water on it.(iv) Water is not the best extinguisher for fires involving petrol and kerosene.(1) (i),(ii) and (iii) (2) (ii) and (iii)(3) (ii) and (iv) (4) All of these

Question

Identify the correct statements.(i) Carbon dioxide is used to extinguish fires involving oil and petrol(ii) Sand is used for extinguishing fires caused by oil.(iii) Fires caused by short-circuit should not be put off by sprinkling water on it.(iv) Water is not the best extinguisher for fires involving petrol and kerosene.(1) (i),(ii) and (iii) (2) (ii) and (iii)(3) (ii) and (iv) (4) All of these

🧐 Not the exact question you are looking for?Go ask a question

Solution

The correct answer is (4) All of these.

Here's why:

(i) Carbon dioxide is used to extinguish fires involving oil and petrol. This is correct because carbon dioxide is a non-conductive and non-reactive gas, which makes it a good fire suppressant. It works by displacing oxygen in the air, which the fire needs to burn.

(ii) Sand is used for extinguishing fires caused by oil. This is also correct. Sand can be used to smother a fire, cutting off the fire's supply of oxygen and stopping the flames.

(iii) Fires caused by short-circuit should not be put off by sprinkling water on it. This is correct because water can conduct electricity, so using water to put out an electrical fire can be dangerous.

(iv) Water is not the best extinguisher for fires involving petrol and kerosene. This is correct because water can spread the fire by causing the fuel to scatter, making the fire worse. Foam or dry chemical extinguishers are typically used for these types of fires.

This problem has been solved

Similar Questions

Mark the correct statements) among the following.I. Water is a very good fire extinguisher as it cools down the fuels such as wood below itsignition temperature.II. Water is a very good fire extinguisher for burning oils and electrical equipment?s.III. Sand and soil may act as a good fire extinguisher for burning oils.A) I onlyB) II onlyC) III onlyD) I and III only

Which of the following should NOT be used to extinguish an electrical fire?(1 Point)WaterFire extinguisher labeled for electrical firesSand or baking sodaNone of these

Which one is the most commonly used fire extinguisher in the laboratory and in life and is suitable for Class A, B, and C fires? Water extinguisher Power extinguisher Class K extinguisher Carbon dioxide extinguisher

What is the principle of soda fire extinguisher?A) Carbon dioxide produced cuts off the supply of oxygen by covering the fire like a blanket.B) Water produced cuts off the supply of oxygen by covering the fire.C) Acid present in the container reacts with fire.D) Nitrogen gas produced cuts off the supply of oxygen by covering the fire

When extinguishing a Type D fire, which type of extinguisher would you use?Dry chemical fire extinguisherDry powder fire extinguisherCarbon dioxide fire extinguisherAny of the above

1/3

Upgrade your grade with Knowee

Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.