Sometimes the results of an ESD Event will not show up for weeks or even months in electrical componentsSelect one:a. Trueb. False

Devices damaged by ESD areSelect one:a. Easily fixed by a qualified technicianb. Always fail immediatelyc. May work at first, and then fail later ond. Not a problem as long as they pass electrical test

ESD can cause different types of damage to unprotected Electrostatic discharge sensitive deviseSelect one:a. Changes in basic characteristicsb. Degradation of performancec. Catastrophic failuresd. All of the above

ESD-sensitive components can be damaged by as little asSelect one:a. 2,000 voltsb. 100 voltsc. 10 voltsd. 200 volts

If you are not sure whether a device is ESD sensitive, you shouldSelect one:a. Treat it as if it is ESD sensitiveb. Treat it like any other devicec. Include it in the scrap reportd. None of the above

ESD Control techniques must be followed any time that you are handling electronic component for prevention of static charge build-up and Safe dissipationSelect one:a. Ground cabinets, shelves, and work surfaces used during handling or storage of ESD sensitive itemsb. All ESD control work surfaces, storage cabinets, and shelves shall be tested periodicallyc. Keep components and assemblies in their protective packaging until it is necessary to remove them from their protective packaging when not working on ESDd. Check your wrist strap before you start working on ESD. component/unit at workshops / On Aircrafte. All