In UART mode of serial communication,  the data bits of a packet (frame) are usually sent along with the followings:Select one:all of the othersone start bitone or more  stop bitsone parity bit

In UART (Universal Asynchronous Receiver/Transmitter) mode of serial communication, the data bits of a packet (frame) are usually sent along with:

1. One start bit: This is the first bit sent in a frame. It signals the receiver that a new frame of data is coming.

2. One or more stop bits: These are sent after the data and parity bits. They signal the end of the frame. The receiver uses the stop bits to detect the end of the frame and to resynchronize for the next frame.

3. One parity bit: This is used for error detection. It is set to either 0 or 1 to make the total number of 1-bits either even (for even parity) or odd (for odd parity). The receiver checks the parity bit to detect if any single bit errors have occurred during transmission.

4. All of the others: This refers to the combination of the start bit, stop bits, and parity bit. All of these are typically included in a UART frame along with the data bits.

So, the answer is "all of the others" because a UART frame usually includes one start bit, one or more stop bits, one parity bit, and the data bits.