Knowee
Questions
Features
Study Tools

Differentiate between bridging and switching in the context of network communication.Give me answer in points

Question

Differentiate between bridging and switching in the context of network communication.Give me answer in points

🧐 Not the exact question you are looking for?Go ask a question

Solution

Sure, here are the differences between bridging and switching in the context of network communication:

Bridging:

  1. A bridge is a network device that connects multiple network segments at the data link layer level of the OSI model.
  2. Bridges can connect a limited number of devices.
  3. They use the MAC address to transmit data to different devices.
  4. Bridges are slower because they require more time to read the entire data frame.
  5. They are less efficient in handling high traffic loads.
  6. Bridges are less intelligent devices as they do not have their own IP address.
  7. They are used in smaller networks.

Switching:

  1. A switch is a network device that connects multiple devices on a computer network by using packet switching to receive, process, and forward data to the destination device.
  2. Switches can connect a larger number of devices.
  3. They use both MAC and IP addresses to transmit data to different devices.
  4. Switches are faster because they only read the frame's header before forwarding it.
  5. They are more efficient in handling high traffic loads.
  6. Switches are more intelligent devices as they have their own IP address.
  7. They are used in larger networks.

This problem has been solved

Similar Questions

What device serves as a bridge point for various communication technologies and forwards outbound and inbound traffic on a switched network?SwitchWAN switchHubRouter

Which of the following statement(s) is/are true for a circuit switched network? a. A communication link may be shared by more than connection. b. A communication link is dedicated to a connection and cannot be shared with other connections. c. The packet transfer delay between a pair of nodes may depend on the prevailing network traffic. d. It is more efficient for bursty traffic.

Which characteristic describes crosstalk? Group of answer choicesthe distortion of the transmitted messages from signals carried in adjacent wiresthe loss of wireless signal over excessive distance from the access pointthe weakening of the network signal over long cable lengthsthe distortion of the network signal from fluorescent lighting

1.3-3 Packet switching versus circuit switching (2).  Which of the characteristics below are associated with the technique of circuit switching? Select all correct answers. [Hint: more than one of the answers is correct].Group of answer choicesReserves resources needed for a call from source to destination.This technique was the basis for the telephone call switching during the 20th century and into the beginning of this current century.This technique is used in the Internet.Frequency Division Multiplexing (FDM) and Time Division Multiplexing (TDM) are two approaches for implementing this technique.Congestion loss and variable end-end delays are possible with this technique.Data may be queued before being transmitted due to other user’s data that’s also queueing for transmission.Resources are used on demand, not reserved in advance

Differentiate between circuit switching and packet switching

1/1

Upgrade your grade with Knowee

Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.