What are the dangers of cutting tight curves and/or working too fast on the bandsaw?You can pull the blade off the wheels and the blade may breakThe blade can start spinning in reverse causing your work to become tangledNone of the above

Other than PPE (Personal Protective Equipment), what are the safety checks you need to perform before turning on the bandsaw?Guard is lowered, work piece is not touching the bladeGuard is raised and work is firmly touching the blade

What effect of the cutting tool causes burr formation?POSSIBLE ANSWERS:FatigueElastic deformationPlastic deformationFracture

Before using hand tools, what are the key safety considerations?You have sketched your cut lines in pencil and measured all parts twice to ensure accuracyYour work piece is fixed securely using a vice or clamp, the tools blade is sharp and the tool is in good working order.The blade of the chisel, knife or saw is blunt to protect yourself from injury

Evidence of Safe Working Practices and OH&S Issues In order to construct the chopping board the following safe working practices and OH&S regulations were followed and adopted: Process Safe Working Practices Cutting Timber Make sure the blade is nowhere near your fingers. Domino Biscuit Machine Sanding Oiling (Complete the above safe working practices table. Name ALL the safety equipment you have used and explain how you used it on your project. Pictures of the safety equipment will increase your marks here)

QUESTION:What effect do positive rake angles generally have on a cutting operation?POSSIBLE ANSWERS:Workpiece cratering is reduced, but the toolholder is destabilized.Cutting forces are decreased, but the cutting edge is weakened.The cutting edge is strengthened, but cutting forces are increased.The toolholder is stabilized, but workpiece cratering occurs more often.