20What is the auto-MDIX feature?It enables a device to automatically configure the speed of its interface.It enables a switch to dynamically select the forwarding method.It enables a device to automatically configure the duplex settings of a segment.It enables a device to automatically configure an interface to use a straight-through or a crossover cable.
Question
20What is the auto-MDIX feature?It enables a device to automatically configure the speed of its interface.It enables a switch to dynamically select the forwarding method.It enables a device to automatically configure the duplex settings of a segment.It enables a device to automatically configure an interface to use a straight-through or a crossover cable.
Solution
The auto-MDIX (Automatic Medium-Dependent Interface Crossover) feature is a technology that allows a device to automatically detect whether it needs to use a straight-through or crossover cable configuration. This means that the device can adjust its settings to match the type of cable that's connected to it, eliminating the need for specific types of cables for different connections. This feature is particularly useful in situations where it's not clear whether a straight-through or crossover cable should be used, such as when connecting devices of the same type.
Similar Questions
24What is the auto-MDIX feature on a switch?the automatic configuration of full-duplex operation over a single Ethernet copper or optical cablethe automatic configuration of an interface for 10/100/1000 Mb/s operationthe automatic configuration of an interface for a straight-through or a crossover Ethernet cable connectionthe ability to turn a switch interface on or off accordingly if an active connection is detected
¿Cuál de las siguientes es la característica MDIX automática en un switch?La configuración automática del funcionamiento full-duplex a través de un único cable Ethernet óptico o de cobreLa capacidad de activar o desactivar una interfaz de switch, según corresponda, si se detecta una conexión activaLa configuración automática de una interfaz para una conexión por cable cruzado o directo de EthernetLa configuración automática de una interfaz para el funcionamiento a 10/100/1000 Mb/s
26A network administrator is connecting two modern switches using a straight-through cable. The switches are new and have never been configured. Which three statements are correct about the final result of the connection? (Choose three.)The duplex capability has to be manually configured because it cannot be negotiated.The auto-MDIX feature will configure the interfaces eliminating the need for a crossover cable.The connection will not be possible unless the administrator changes the cable to a crossover cable.The link between switches will work as full-duplex.The link between the switches will work at the fastest speed that is supported by both switches.If both switches support different speeds, they will each work at their own fastest speed.
A computer technician is attempting to modify settings in the Network Adapter > Properties > Advanced tab > Speed and Duplex . What is a possible effect (or impact) if this option is configured incorrectly?(1 Point)
What type of Ethernet uses an AUI connector on coaxial cable?10Base5100BaseTX10BaseT100BaseFX
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.