A person can be charged, and as a conductor should be grounded at the ESD protective workstation So always be grounded when handling ESD sensitive items; always wear a wrist strap when seated at an ESD protected workstation.Select one:a. Trueb. False

People who are not wearing appropriate personal groundingSelect one:a. Should not be in an ESD protected areab. Should not perform operations at ESD workstationsc. All of the above

One of the following is true about ESD.Select one:a. A component is not safe if it is laying on top of the ESD packaging.b. Certainly, grounded personnel handling ESDS should not be wearing gloves or finger cots made from Insulative material. If gloves or finger cots are used, the material should be dissipative or conductivec. Common point ground is a terminal where people and ESD work surfaces can all be connected to groundd. All of the above

ESD Control techniques must be followed any time that you are handling electronic component for prevention of static charge build-up and Safe dissipationSelect one:a. Ground cabinets, shelves, and work surfaces used during handling or storage of ESD sensitive itemsb. All ESD control work surfaces, storage cabinets, and shelves shall be tested periodicallyc. Keep components and assemblies in their protective packaging until it is necessary to remove them from their protective packaging when not working on ESDd. Check your wrist strap before you start working on ESD. component/unit at workshops / On Aircrafte. All

Static dissipative materials will allow a charge to be drained to groundSelect one:a. In a slow and controlled mannerb. Rapidly, creating an ESD eventc. Only when the relative humidity is below 30 percentd. Too slowly to be effective for ESD control

An example of Electrostatic Discharge (ESD) is the one sometimes feels after walking across carpeting and touching a metal doorknobSelect one:a. Trueb. False