In a reg to reg timing path with ideal clock, Tcq = 0.5ns and Tcombo = 5ns and Tsetup is 0.5ns, then the minimum clock period should be to meet setup
Question
In a reg to reg timing path with ideal clock, Tcq = 0.5ns and Tcombo = 5ns and Tsetup is 0.5ns, then the minimum clock period should be to meet setup
Solution
The minimum clock period to meet setup should be the sum of Tcq, Tcombo, and Tsetup.
Step 1: Add Tcq and Tcombo 0.5ns (Tcq) + 5ns (Tcombo) = 5.5ns
Step 2: Add the result to Tsetup 5.5ns + 0.5ns (Tsetup) = 6ns
So, the minimum clock period should be 6ns.
Similar Questions
What value do we need to load the timer’s register if we want to have a time delay of 5 ms (milliseconds) using timer 0, T0 in mode 1? Consider crystal frequency to be 12 MHz.1 pointTH0 = CEH, TL0 = 70HTL0 = ECH, TH0 = 78Hnone of theseTH0 = ECH, TL0 = 78H
f the crystal frequency is 4.5 MHz, determine the time for setting the timer flag for mode 1 if TH0 starts at 00H.1 point12 ms2 ms174.78 ms50 ms
What is the resolution of Timer/Counter0 when the CPU frequency is set to 16MHz and the following code is used for configuration of prescaler:TCCR0B |= (1<<CS02);Give your answer in microseconds (us).
If the crystal frequency is 4.5 MHz, determine the time for setting the timer flag for mode 3 if count in TH0 is 9CH.1 point264 micro sec.50 micro sec.50 ms.100 ms.
What will be the TCCR0 value for Normal Mode, no prescalar, with the clock coming from the AVR Crystal.
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.