Water leaves a nozzle of area 0.01 m2 at a velocity of 2 m per second. What is the mass flow rate of the water if the density is 1000 kg/m3?

Water of density 1000 kg/m3 flows through a tube as shown in figure1a below.At section 1 the pressure is 200 kN/m2, the velocity is 5 m/s and the pipe diameter is0.12m. The pipe diameter at section 2 is 0.065m.Calculate: i) the velocity and pressure at section 2

Water flows through a 1000 cm^2 pipe at 200 kg/s. Find the velocity, if the water is at 20 bar and 45 ℃.1 point2.0 m/s0.0002 m/s0.55 m/s5.5 m/s6.Question 6Consider a pump with a mass flow rate of wat

A hose-pipe of cross-section area 2 cm2 delivers 1500 litres of water in 5 minutes. What is the speed of water in m/s through the pipe?

A garden hose attached with a nozzle is used to fill a 10 L bucket. The inner diameter of the hose is 2 cm, and it reduces to 0.8 cm at the nozzle exit. If it takes 50 s to fill the bucket with water, determine the velocity of water at the nozzle exit. Express your answer in m/s.

A fluid (rho = 1200kg / (m ^ 3)) flows through a horizontal 3.0 mm diameter pipe. When the Reynolds number is 1500, the head loss over a 6 m length of pipe is 2 m of that particular fluid. Determine the mass flow rate in kg/hr of the fluid at this condition.