The driver of the truck shown below attempts to towthe crate which has a weight of 2,500 N. The crate isinitially at rest and the coefficient of static frictionbetween the crate and the ground is 0.4.Determine the tension in the cable required toovercome friction

What is the tension in a rope that is being used to pull a crate along a frictionlesshorizontal surface at a rate of 4 m/s2? The mass of the crate is 1200 kg. The anglebetween the rope and the horizontal is 30ºA) 12000 NB) 5543 NC) 14200 ND) 6200 NE) 4800 N

A steel tow cable is used to pull a car at a constant velocity toward a barrier during a crash test.  What information about the test is needed to calculate the tension in the cable?Friction force on the carMass of the carVelocity of the carA.I onlyB.II onlyC.III onlyD.II and III only

A flatbed truck is carrying a crate along a level road. The coefficient of static friction between the load and the bed is 0.40. The truck accelerates forward and the crate stays in its place on the truck bed. In what direction is the force that the bed exerts on the crate?Group of answer choicesThere is not enough information to answer this question.backwardforwardThere is no frictional force because the crate does not move with respect to the bed.toward the center of the road

A car with a weight of 15,000N is being towed up a 20 degree slope at constant velocity. Friction is negligible. What is the tension in the tow rope?Draw a free-body diagram to help you.Give your answer to 0 decimal places in N. Do not include the units in your answer i.e. you would write 12 N as 12

A car with a weight of 15,000N is being towed up a 20 degree slope at constant velocity. Friction is negligible. The tow rope is rated at 6000 N maximum tension. What are the forces acting on the car?