We will give the PC’s and Switch VLANs a valid IPv4 address and valid gateway within their subnet.A gateway IP address is assigned to the router port of a LAN.The Gateways for each LAN will be the FIRST VALID IP address within it’s subnet range.IP Address assigned to LAN devices must be unique within the same LAN starting with the SECOND VALID IP addressSet device IP addresses in ascending order as listed in the table.Gateway addresses assigned to PCs and VLANs must be identical within the same LANQuestion 1712 PointsR1 LANNote - set device IP addresses in ascending order. Device Description IP Address Gateway S1 VLAN Blank 1 Blank 2 PC1 Blank 3 Blank 4 PC2 Blank 5 Blank 6 Note: The gateway address will be same IP Address for these three devices
Question
We will give the PC’s and Switch VLANs a valid IPv4 address and valid gateway within their subnet.A gateway IP address is assigned to the router port of a LAN.The Gateways for each LAN will be the FIRST VALID IP address within it’s subnet range.IP Address assigned to LAN devices must be unique within the same LAN starting with the SECOND VALID IP addressSet device IP addresses in ascending order as listed in the table.Gateway addresses assigned to PCs and VLANs must be identical within the same LANQuestion 1712 PointsR1 LANNote - set device IP addresses in ascending order. Device Description IP Address Gateway S1 VLAN Blank 1 Blank 2 PC1 Blank 3 Blank 4 PC2 Blank 5 Blank 6 Note: The gateway address will be same IP Address for these three devices
Solution
The question seems to be asking for the assignment of IP addresses and gateways for a LAN setup involving a router (R1), a switch (S1), and two PCs (PC1 and PC2).
Here's how you can assign the IP addresses and gateways:
-
S1 VLAN:
- IP Address (Blank 1): This should be the second valid IP address in the subnet range as per the instructions.
- Gateway (Blank 2): This should be the first valid IP address in the subnet range as it's the gateway for the LAN.
-
PC1:
- IP Address (Blank 3): This should be the next valid IP address in the subnet range after S1 VLAN's IP address.
- Gateway (Blank 4): This should be the same as the gateway assigned to S1 VLAN (Blank 2) as they are in the same LAN.
-
PC2:
- IP Address (Blank 5): This should be the next valid IP address in the subnet range after PC1's IP address.
- Gateway (Blank 6): This should be the same as the gateway assigned to S1 VLAN and PC1 (Blank 2 and Blank 4) as they are in the same LAN.
Please note that the specific IP addresses and gateways can't be provided without knowing the subnet range.
Similar Questions
PC1 and PC2 are on two different Ethernet LAN's that are separated by an IP router. PC1’s IP address is 10.1.1.1, and no subnetting is used. Which of the following addresses could be used for PC2?(Choose two answers)Question 6Select one or more:225.1.1.1192.168.5.6172.31.15.1710.1.1.210.200.200.110.2.2.2
Three devices are on three different subnets. Match the network address and the broadcast address with each subnet where these devices are located. (Not all options are used.)Device 1: IP address 192.168.10.77/28 on subnet 1Device 2: IP address192.168.10.17/30 on subnet 2Device 3: IP address 192.168.10.35/29 on subnet 3Group of answer choicesSubnet 1 network numberSubnet 1 broadcast addressSubnet 2 network numberSubnet 2 broadcast addressSubnet 3 network numberSubnet 3 broadcast address
Which address should be configured as the default gateway address of a client device?the Layer 2 address of the switch port that is connected to the workstationthe IPv4 address of the router interface that is connected to the same LANthe Layer 2 address of the switch management interfacethe IPv4 address of the router interface that is connected to the internet
Your company has a LAN in its downtown office and has now set up a LAN in the manufacturing plant in the suburbs. To enable everyone to share data and resources between the two LANs, what type of device is needed to connect them but keep them as separate LANs?Question 31Select one:a.modemb.cablec.hubd.routere.non-VLAN switch
Question 6Which of the following is a device that knows how to forward traffic between independent networks?1 pointClientSwitch RouterHub
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.