Knowee
Questions
Features
Study Tools

During automatic transmission maintenance, transmission fluid that is ____________________ indicates that a clutch is slipping.

Question

During automatic transmission maintenance, transmission fluid that is ____________________ indicates that a clutch is slipping.

🧐 Not the exact question you are looking for?Go ask a question

Solution

During automatic transmission maintenance, transmission fluid that is burnt or has a strong burnt smell indicates that a clutch is slipping.

Here are the steps to identify this:

  1. Locate the transmission fluid dipstick: This is usually at the back of the engine in a rear-wheel drive vehicle, and at the front in a front-wheel drive vehicle.

  2. Remove the dipstick and wipe it clean: Use a clean, lint-free rag to wipe off any fluid.

  3. Reinsert the dipstick: Push it all the way back in, then pull it out again.

  4. Examine the fluid: Look at the color and smell it. Fresh transmission fluid is usually bright red and has a distinct, slightly sweet smell. If the fluid is dark brown or black and has a burnt smell, this indicates that a clutch may be slipping.

  5. If you notice these signs, it's recommended to take your vehicle to a professional mechanic for further diagnosis and repair.

This problem has been solved

Similar Questions

Technician A states proper maintenance of an automatic transmission will ensure the vehicle performs as expected for a long time. Technician B states improper maintenance, such as using the wrong automatic transmission fluid, may result in premature clutch material failures. Which technician is correct?

Hydraulic clutch systems may be self-adjusting.

Technician A says that too much free play can cause the clutch to slip. Technician B says that too little free play can cause the clutch to drag. Which technician is correct?

Technician A says a symptom of a leaking hydraulic clutch master cylinder is that fluid can drip onto the interior carpet behind the clutch pedal. Technician B says to use compressed air to clear away dust before performing a visual inspection of the clutch. Which technician is correct?

When reinstalling a hydraulic-operated clutch, Technician A says that the clutch hose/pipe assembly connects to the slave cylinder. Technician B says that you should inspect the hose for leaks. Which technician is correct?

1/1

Upgrade your grade with Knowee

Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.