What will be the output from a D flip – flop if the clock is low and D = 0?Select one:1.02.13.No change4.Toggle between 0 and 1
Question
What will be the output from a D flip – flop if the clock is low and D = 0?Select one:1.02.13.No change4.Toggle between 0 and 1
Solution
The output will be "No change". This is because the D flip-flop only changes its output state when the clock signal is high (or on the rising edge of the clock signal, depending on the type of D flip-flop). If the clock is low, the output will remain in its previous state, regardless of the value of D.
Similar Questions
In a T flip-flop, what is the output when T is 0 and the flip-flop is in the "set" state?a. 0b. 1c. Don't knowd. It depends on other factor
Which of the following is correct for a gated D-type flip-flop?*The Q output is either SET or RESET as soon as the D input goes HIGH or LOWThe output complement follows the input when enabledOnly one of the inputs can be HIGH at a timeThe output toggles if one of the inputs is held HIGH
When does a negative level-triggered flip-flop changes its state?Select one:1.When the clock is negative2.When the clock is positive3.When the inputs are all zero4.When the inputs are all one
Design a D-flip flop in VHDL
D Flip Flop can be made from JK Flip flop by makingJ = K =1J = KJ=K'J = 0 K =1
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.