Select the statements that best describe the Router [There could be more than one correct answers] Router marks the end point of a network Router may have multiple interfaces but on each interface there is a separate network Two interfaces of a router cannot fall in the same network Two interfaces of a router can fall in the same network

se the following scenario to answer the 10 questions below: You have 3 networks (A, B, and C) and 2 routers (Y and Z). Network A has an address space of 10.1.1.0/24 and is connected to router Y, using the interface 10.1.1.1.Network B has an address space of 192.168.1.0/24 and is connected to Router Y, using the interface 192.168.1.254. Network B is also connected with router Z, using the interface of 192.168.1.1. Network C has an address space of 172.16.1.0/24 and is connected to router Z, using the interface 172.16.1.1. The diagram below represents these connections and interfaces.1.Question 1Computer 1 on network A, with the IP address of 10.1.1.8, wants to send a packet to Computer 2, with the IP address of 10.1.1.10. On which network is computer 2?1 pointNetwork BNetwork CNetwork ANot present2.Question 2Computer 1 wants to send a packet to Computer 2. Since computer 2 is not on the local network, Computer 1 checks the ARP table for the corresponding ______ that matches the gateway IP.1 pointTTL valuePort numberDestination MAC addressMAC address3.Question 3Which layer constructs the Ethernet frame?1 pointData link layerApplication layerPhysical LayerTransport layer4.Question 4What information is in the data payload for the IP datagram?1 pointART tableThe ARP discovery requestNetwork B address spaceTCP segment5.Question 5 When constructing the Ethernet datagram to send the packet from Router Y to Router Z, what information needs to be in the destination MAC address?1 pointRouter Y’s MAC addressRouter Z’s MAC addressComputer 2’s MAC addressComputer 1’s MAC address6.Question 6Computer 1 on Network A sends a packet to Computer 2 on Network C. What's the last step that Router Z does after receiving the Ethernet frame?1 pointCalculates a checksum and compares this checksum with the one in the Ethernet frame headerStrips away the Ethernet frame, leaving the IP datagram. Performs a checksum calculation against the entire datagram Sends back the packages to router Y for confirmationDecrements the TTL by 1, calculates a new checksum, and makes a new IP datagram. This new IP datagram is again encapsulated on a new Ethernet frame.7.Question 7 Computer 1 on network A, with IP address of 10.1.1.10, wants to send a packet to Computer 2, with IP address of 192.168.1.14. If the TTL value was set to 64 at the beginning, what is the value of the TTL once it reaches its destination?1 point06165638.Question 8Computer 1 on network C, with IP address of 172.16.1.57, wants to send a packet to Computer 2, with IP address of 192.168.1.14. Taking in consideration that computer 1 is sending a request to a web server on computer 2, listening on port 80, and the source port on computer 1 is 5000, which of the following contains the correct information for the fourth TCP segment of data?1 point Source Port: 80Destination Port: 5000Sequence Number: 1Acknowledgment Number: 1 Source Port: 5000Destination Port: 80Sequence Number: 1Acknowledgment Number: 2 Source Port: 5000Destination Port: 80Sequence Number: 4Acknowledgment Number: 5 Source Port: 8081Destination Port: 50Sequence Number: 4Acknowledgment Number: 19.Question 9 Computer 1 on network A, with IP address of 10.1.1.10, wants to send a packet to Computer 2, with IP address of 172.16.1.64. Which of the following has the correct IP datagram information for the fields: Version, minimum Header Length, Source IP, and Destination IP?1 point Version: 4Header Length: 20Source IP Address: 10.1.1.10Destination IP address: 172.16.1.64 Version: 6Header Length: 20Source IP Address: 8a:1a:2b:3c:4d:5fDestination IP address: 2a:2b:3c:4d:8f Version: 4Header Length: 32Source IP Address: 10.1.1.1Destination IP address: 172.16.1.1 Version: 5Header Length: 16Source IP Address: 171.1.1.1.Destination IP address: 172.16.1.0/24.10.Question 10The ________ layer is responsible for sending ones and zeros through a process called modulation from Computer 1 to Computer 2.1 pointApplicationNetworkTransportPhysical

A network can use routers and gateways.Explain the role of routers and gateways in a network.

Take a look at the network diagram below. Which of the following IP addresses would be valid to assign to interface Fa0/2 on the router? (Choose all that apply) Question 2Select one or more:172.16.12.14172.16.12.104172.16.12.33172.16.12.152172.16.12.95

Which of the following statement is TRUE about routers?Group of answer choicesAll statements are FALSE.Routers de-encapsulates the frame and drop the packet.Routers de-encapsulates the frame to check the destination address field.Routers de-encapsulates the frame to check the size of the packet.Next

Which of the following are types of entries in a routing table? (Select all that apply) Group of answer choicesDirectly-connected networksDefault routesSubnet masksRemote networks