ESDS LRUsSelect one:a. Have ESDS labels for identification.b. Have no necessary precautions than equipment not ESDS.c. All

If you are not sure whether a device is ESD sensitive, you shouldSelect one:a. Treat it as if it is ESD sensitiveb. Treat it like any other devicec. Include it in the scrap reportd. None of the above

People who are not wearing appropriate personal groundingSelect one:a. Should not be in an ESD protected areab. Should not perform operations at ESD workstationsc. All of the above

The most important part of an ESD control program is?Select one:a. Wrist and heel strapsb. Engineering controlsc. Employeesd. ESD safe workstation

ESD Control techniques must be followed any time that you are handling electronic component for prevention of static charge build-up and Safe dissipationSelect one:a. Ground cabinets, shelves, and work surfaces used during handling or storage of ESD sensitive itemsb. All ESD control work surfaces, storage cabinets, and shelves shall be tested periodicallyc. Keep components and assemblies in their protective packaging until it is necessary to remove them from their protective packaging when not working on ESDd. Check your wrist strap before you start working on ESD. component/unit at workshops / On Aircrafte. All

One of the following is true about ESD.Select one:a. A component is not safe if it is laying on top of the ESD packaging.b. Certainly, grounded personnel handling ESDS should not be wearing gloves or finger cots made from Insulative material. If gloves or finger cots are used, the material should be dissipative or conductivec. Common point ground is a terminal where people and ESD work surfaces can all be connected to groundd. All of the above