Knowee
Questions
Features
Study Tools

Giving the following process parameters for stir casting and their levels as indicated; Stiring Time, ST ( 10, 15, 20 min), Cast temperature, CT(700, 750, 800 °C), Percentage reinforcement, PR ( 0, 1.5, 3.0 wt%), Mould Temperature, MT( 140, 180, 220 °C). produce a L16 orthogonal array design for the above control factors and their selected level

Question

Giving the following process parameters for stir casting and their levels as indicated; Stiring Time, ST ( 10, 15, 20 min), Cast temperature, CT(700, 750, 800 °C), Percentage reinforcement, PR ( 0, 1.5, 3.0 wt%), Mould Temperature, MT( 140, 180, 220 °C). produce a L16 orthogonal array design for the above control factors and their selected level

🧐 Not the exact question you are looking for?Go ask a question

Solution

Sure, here is the L16 orthogonal array design for the given control factors and their selected levels:

Experiment No. Stirring Time (ST) Cast Temperature (CT) Percentage Reinforcement (PR) Mould Temperature (MT)
1 10 min 700 °C 0 wt% 140 °C
2 10 min 750 °C 1.5 wt% 180 °C
3 10 min 800 °C 3.0 wt% 220 °C
4 15 min 700 °C 1.5 wt% 220 °C
5 15 min 750 °C 3.0 wt% 140 °C
6 15 min 800 °C 0 wt% 180 °C
7 20 min 700 °C 3.0 wt% 180 °C
8 20 min 750 °C 0 wt% 220 °C
9 20 min 800 °C 1.5 wt% 140 °C
10 10 min 800 °C 0 wt% 220 °C
11 15 min 700 °C 3.0 wt% 180 °C
12 20 min 750 °C 1.5 wt% 140 °C
13 10 min 750 °C 3.0 wt% 180 °C
14 15 min 800 °C 0 wt% 140 °C
15 20 min 700 °C 1.5 wt% 220 °C
16 10 min 800 °C 1.5 wt% 140 °C

Please note that the above table is just an example of how you can arrange the parameters in an L16 orthogonal array. The actual arrangement may vary depending on the specific requirements of your experiment.

This problem has been solved

Similar Questions

Giving the following process parameters for stir casting and their levels as indicated; Stiring Time, ST ( 10, 15, 20 min), Cast temperature, CT(700, 750, 800 °C), Percentage reinforcement, PR ( 0, 1.5, 3.0 wt%), Mould Temperature, MT( 140, 180, 220 °C). produce a table of the control factors and their selected levels

Control Factors Level 1 Level 2 Level 3 Stirring Time (ST) 10 15 20 Cast Temperature (CT) 650 700 750 Percentage Reinforcement (PR) 0 0.75 1.5 Giving the control factors and levels produce an L16 orthogonal array

What factors influence the solidification time in casting processes, and how can these factors be controlled or optimized to achieve desired manufacturing outcomes?

Exercise 4:WRITE A PART PROGRAM FOR LATHE OPERATION (Circular Interpolation).DRAWING OF THE COMPONENT

WRITE A PART PROGRAM FOR LATHE OPERATION (Circular Interpolation).

1/1

Upgrade your grade with Knowee

Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.