What type of information is stored in the OSPF neighbor table A. Router IDs and interface addresses of neighboring devices. B. Destination IP address, cost, and next-hop IP address. C. LSAs generated by a router itself and received from neighbors. D. Status information of the neighbor relationship between OSPF routers.

What mechanism does OSPF use to ensure all routers in an area have complete and identical information about the network?Bellman-Ford algorithmSpanning Tree ProtocolLink-State Advertisements (LSAs)Distance Vector

Select all statement(s) that are true.(a) A link state protocol floods information to each AS router about the state of all routers in the AS.(b) A link state protocol is an IGP routing protocol used in packet switching networks.(c) OSPF uses a Link State Advertisement (LSA) message to distribute changes or initial startup information to other routers.

What addressing information is recorded by a switch to build its MAC address table?the source Layer 2 address of incoming framesthe destination Layer 3 address of incoming packetsthe destination Layer 2 address of outgoing framesthe source Layer 3 address of outgoing packets

An OSPF router has three directly connected networks; 172.16.0.0/24, 172.16.1.0/24, and 172.16.2.0/24. Which OSPF network command would advertise only the 172.16.1.0 network to neighbors?router(config-router)# network 172.16.1.0 0.0.255.255 area 0router(config-router)# network 172.16.0.0 0.0.15.255 area 0router(config-router)# network 172.16.1.0 0.0.0.255 area 0router(config-router)# network 172.16.1.0 0.0.0.0 area 0

In which memory location is the routing table of a router maintained?ROMNVRAMRAMflash