Which two factors must be considered when replacing old RAM modules in a PC? (Choose two.)The new RAM must be compatible with the motherboard.The speed of the new RAM must be supported by the chipset.The power supply must provide the voltage that is requred by the new RAM.The new RAM must be compatible with BIOS or UEFI.The new RAM must match the old RAM in terms of capacity and speed.
Question
Which two factors must be considered when replacing old RAM modules in a PC? (Choose two.)The new RAM must be compatible with the motherboard.The speed of the new RAM must be supported by the chipset.The power supply must provide the voltage that is requred by the new RAM.The new RAM must be compatible with BIOS or UEFI.The new RAM must match the old RAM in terms of capacity and speed.
Solution
-
The new RAM must be compatible with the motherboard: This is crucial because not all RAM modules are compatible with all motherboards. The motherboard must have the appropriate slots and support for the RAM type (DDR3, DDR4, etc.).
-
The speed of the new RAM must be supported by the chipset: The chipset on the motherboard must be able to support the speed of the new RAM. If the RAM is faster than what the chipset can handle, the system will either not work or the RAM will operate at a lower speed.
The other factors mentioned are not as critical. The power supply generally does not need to be considered when installing new RAM, as RAM does not significantly affect power draw. Compatibility with BIOS or UEFI is usually not an issue, as most modern systems can support a wide range of RAM modules. Matching the old RAM in terms of capacity and speed is not necessary, but it is recommended for optimal performance.
Similar Questions
The three rules to go by as followed. Ensure the ram modules are of the same capacity, speed and type. Insert the ram modules into the corresponding slots on the motherboard. Enable the dual-channel or multi-channel mode in the bios settings. You want to looked at your motherboard some may tell you that you just slide you cards in to the slot than boot up go into your bios settings.Respond postively
which factors of the Mother board makes it have more significant influence on speed of machines than Memory capacity...Distance between RAM and CPUBus Width and Bus SpeedNumber of expansion slotsBus arrangement
A PC operator is building out a new system to replace an engineering technician's older system. The new system is rated 2400 MT/s. The engineer wants to maximize the amount of RAM. Which amount should they put in?a.16 GBb.8 GBc.32 GBd.128 GB
A student is looking to add memory in order to speed up a tower computer. Which type of memory module should the student be looking for?DIMMDIPSIMMSODIMM
In which section of the motherboard would a memory module be installed?
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.