A characteristic of Ethernet straight-through UTP (Unshielded Twisted Pair) cable is that it can be used to connect two network hosts. This type of cable is commonly used to connect devices that are different, such as a computer to a network switch or a network switch to a router.

It is also true that UTP cable is susceptible to interferences from EMI (Electromagnetic Interference) and RFI (Radio Frequency Interference). This is because the cable is unshielded, meaning it lacks a layer of conductive material to protect the internal twisted wire pairs from electromagnetic interference.

However, it is not correct to say that Ethernet straight-through UTP cable is Cisco proprietary. This type of cable is a standard networking cable used across many different brands and devices, not just those made by Cisco.

Lastly, it is not accurate to say that Ethernet straight-through UTP cable can only use the T568A standard at both ends of the cable. In fact, a straight-through cable can use either the T568A or T568B standard at both ends. The important thing is that the same standard is used on both ends. If one end uses the T568A standard and the other end uses the T568B standard, then you have a crossover cable, not a straight-through cable.

Question

A characteristic of Ethernet straight-through UTP (Unshielded Twisted Pair) cable is that it can be used to connect two network hosts. This type of cable is commonly used to connect devices that are different, such as a computer to a network switch or a network switch to a router.

It is also true that UTP cable is susceptible to interferences from EMI (Electromagnetic Interference) and RFI (Radio Frequency Interference). This is because the cable is unshielded, meaning it lacks a layer of conductive material to protect the internal twisted wire pairs from electromagnetic interference.

However, it is not correct to say that Ethernet straight-through UTP cable is Cisco proprietary. This type of cable is a standard networking cable used across many different brands and devices, not just those made by Cisco.

Lastly, it is not accurate to say that Ethernet straight-through UTP cable can only use the T568A standard at both ends of the cable. In fact, a straight-through cable can use either the T568A or T568B standard at both ends. The important thing is that the same standard is used on both ends. If one end uses the T568A standard and the other end uses the T568B standard, then you have a crossover cable, not a straight-through cable.

Knowee AI · Accepted Answer

A characteristic of Ethernet straight-through UTP (Unshielded Twisted Pair) cable is that it can be used to connect two network hosts. This type of cable is commonly used to connect devices that are different, such as a computer to a network switch or a network switch to a router.

It is also true that UTP cable is susceptible to interferences from EMI (Electromagnetic Interference) and RFI (Radio Frequency Interference). This is because the cable is unshielded, meaning it lacks a layer of conductive material to protect the internal twisted wire pairs from electromagnetic interference.

However, it is not correct to say that Ethernet straight-through UTP cable is Cisco proprietary. This type of cable is a standard networking cable used across many different brands and devices, not just those made by Cisco.

Lastly, it is not accurate to say that Ethernet straight-through UTP cable can only use the T568A standard at both ends of the cable. In fact, a straight-through cable can use either the T568A or T568B standard at both ends. The important thing is that the same standard is used on both ends. If one end uses the T568A standard and the other end uses the T568B standard, then you have a crossover cable, not a straight-through cable.

Question

Solution

Similar Questions

Upgrade your grade with Knowee